2
Smart Pad
3
•
Network Cloning
permits simultaneous transfer of programmed contents from one keypad to as many
as 16 keypads wired on the same IR bus (single zone network).
Cloning can also be done from one keypad to another, or from a "virtual" keypad created with Dragon
Drop-IR™, via the
COM Port
.
•
Dragon Drop-IR
™ (optional), a Windows
®
based program, permits rapid configuring, learning, duplica-
tion and filing of SmartPad
3
programming.
•
Speaker Relay
permits local muting of speakers for single zone systems.
•
Code Group
and
Bank Tracking
Programming
permit specialized configurations.
•
E
2
PROM
stores memorized contents.
No backup batteries needed
!
•
Write/Protect
switch safeguards memory contents.
•
Memory
. LM110; 8 kbytes. PM110; 32 kbytes.
•
Standard 4 terminal output
allows use on same IR bus as all Xantech IR Receivers and controllers.
MODULE DESCRIPTIONS
Perhaps the easiest way to become familiar with the
SmartPad
3
is to gain an understanding of the modules
that make up the system. The modules are divided into two basic groups: the
Key
(or button) modules, and
the docking
Base
modules. The Key modules plug into the Base modules.
The Key Modules
There are ten single-gang key module assemblies currently available. The first six shown have 12 buttons.
The last four have 11 buttons and include a cursor key cluster. The module shells and buttons are available
in white, ivory and black. An illustration and description of each follow:
KM1F
KM8
KM2
KM4
KM6
KM1N
The
KM1F
module can be used as a single-gang single-bank keypad or, with other source selection or
function modules, for 2 or 3-gang configurations. A selection of
function
buttons are included for function
control commands.
The
KM1N
is similar to the KM1F except it is intended for direct numeric entry of channels on DSS receivers,
disk/track selection on CD changers, etc. It can be used with other source or function modules for 2 or 3-
gang configurations.
Numeric
and some
function
buttons are included.
The
KM2
includes 2 source (bank) keys and 10 function control keys. It can be used as a single-gang two-
source (bank) keypad or, with other function modules, in 2 or 3-gang configurations. A selection of
source
and
function
buttons are included.
The
KM4
and
KM6
are similar to the KM2, except they have 4 source, 8 function and 6 source, 6 function
keys respectively. Again, they can be used in 2 or 3-gang configurations. A selection of
source
and
function
buttons are included.
The
KM8
includes 8 source and 4 function keys. Again, it can be used as a single-gang 8-source (bank)
keypad, or, with other function modules, for 2 or 3-gang configurations. A selection of
source
and
function
buttons are included.
