background image

 

 

 

   

 

19 

Xantech Limited Warranty 

(Effective for products sold after July 1, 2006) 

 

Xantech Corporation (“Xantech”) warrants to the holder of a valid proof of purchase as the first end-user purchaser 
(“You”), its products to be free from defects in materials and workmanship for the periods specified below from the date of 
purchase. This limited warranty extends only to You for product purchased and used in the United States of America. For 
product purchased outside of the United States of America, You must contact the Xantech authorized distributor in your 
region for warranty services. Product is not intended for end user installation. If within the applicable warranty period 
above You discover such item was not as warranted above and You promptly notify Xantech in writing, Xantech shall 
repair or replace the items at its option. Xantech may elect which remedy or combination of remedies to provide in its sole 
discretion. Xantech may use functionally equivalent reconditioned/refurbished/pre-owned or new products or parts under 
this limited warranty. This warranty shall not apply (a) to product which shall have been installed by other than an 
authorized Xantech installer, (b) to installed product which is not installed to Xantech’s specifications, (c) to product which 
shall have been repaired or altered by others than Xantech, (d) to charges for installation or set up or adjustment of 
customer controls, (e) to product that has suffered normal cosmetic deterioration (f) to product which shall have been 
subjected to negligence, misuse, abuse, accident, or damage by circumstances beyond Xantech’s control, including, but 
not limited to, lightning, flood, electrical surge, tornado, earthquake, or any other catastrophic events beyond Xantech’s 
control, or (g) to product which shall have been subjected to improper operation, connected equipment failure or 
malfunction, inadequate packing or shipping damage, maintenance or storage, or to other than normal use of service. The 
foregoing warranties do not cover reimbursement for labor, transportation, shipping, removal, installation, or other 
expenses which may be incurred in connection with repair or replacement. All claims for product shipping damage must 
be processes within 3 days of receipt by You. 
 
A Xantech Return Authorization (RA) must be obtained from Xantech by You, your installer or your distributor for Product 
covered under this warranty. Covered product must be sent to Xantech together with proof of purchase, RA number, 
prepaid and insured to Xantech. Freight collect shipments will be refused. Risk of loss or damage in transit is borne by the 
sender. Xantech's warranty does not cover Products which have been received improperly packaged, altered, or 
physically damaged. Products will be inspected upon receipt. 
 
Except as may be expressly provided and authorized in writing by Xantech, Xantech shall not be subject to any other 
obligations or liabilities whatsoever with respect to equipment manufactured or sold by Xantech or services rendered by 
Xantech. 
 
THE FOREGOING WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESSED AND IMPLIED 
WARRANTIES, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS 
FOR A PARTICULAR PURPOSE. 

 
ATTENTION: TO OUR VALUED CONSUMERS 

To insure that consumers obtain quality pre-sale and after-sale support and service, Xantech products are sold 
exclusively through authorized dealers and authorized distributors. The warranties on Xantech products are NOT VALID if 
the products have been purchased from an unauthorized dealer or distributor. In order to determine if your Xantech re-
seller is authorized, please call Xantech (800) 843 - 5465. 
 

XANTECH PRODUCT  

(go to Xantech.com/warranty for model numbers)

 

WARRANTY DURATION 
 

IR Receivers and IR Emitters

 

Limited Lifetime 

Remote Control Switchers

 

Limited Lifetime 

Modules and Connecting Blocks

 

Limited Lifetime 

Accessories

 

Limited Lifetime 

Speakers

 

Limited Lifetime 

Volume Controls and Speaker Selectors

 

5 year Limited 

DIGI-5, MRC, BX, ZPR and Commercial Products

 

2 year Limited

 

Amplifiers

 

2 year Limited

 

Control Interfaces

 

2 year Limited 

Hand Held Remote Controls

 

1 year Limited

 

SPLCD Product

 

1 year Limited

 

Source Components, XIS100

 

1 year Limited

 

 

Summary of Contents for D5SH4





















Reviews: