18
0: Display Current Settings
Selecting "0" will display your CRM-WIC's:
•
MAC Address
•
DHCP Enabled / Disabled State
•
IP Address Setting
•
Subnet Mask Setting
•
Gateway IP Address Setting
•
Host Name - You May access your CRM-WIC at the URL
<http://[Host Name]/>
•
Password
•
OS Loaded / Not Loaded State
•
OS Filename
1: Restore Factory Defaults
This option restores the CRM-WIC’s network settings to the factory defaults. {see Factory Default
Configurations on page 11}.
2: Configure IP Settings
You may enable DHCP or manually set an IP address, subnet mask, and gateway IP address.
3: Set Password
The maximum length is 8 characters, numbers and letters only. (If you are prompted for a user name as
well as a password, you may use any name or leave it blank.
4: Set Host Name
The maximum length is 16 characters, numbers and letters only. Once set, you will be able to access your
CRM-WIC at the URL
<http://[Host Name]/>
.
Summary of Contents for CRM-WIC
