www.xa.com/en
56
Double click the button to enter/exit the shuttle
mode.
Driving the vehicle along a certain route, the sys-
tem will automatically record the driving path.
Press and hold the B button, then the system will
learn the path.
Press and hold the A button or the B button
again, then the vehicle will automatically shuttle
according to the previously recorded path. Press
and hold the A button and the vehicle will drive
to the starting point along the path; press and
hold the B button and the vehicle will drive to the
finishing point along the path. Both operations
can be repeated.
Double click the button
to exit the shuttle
mode.
The system will optimize the recorded path while
learning, leading to deviations from the actual
path and the shuttle route. If there are some
points that the vehicle must drive by, you can
press and hold the button
to record them as
checkpoints during the learning process. Then
the vehicle will record the points and pass them
at the time of playback.
Once you activate shuttle mode the next time af-
ter exiting, the system will delete the previously
learned path.
Shuttle mode is not available in surveying and
mapping mode.
Shuttle mode
Record a designated route with the ControlStick, then the vehicle can make automatically shuttles
between those locations.
