@2018 XAG Australia All Rights Reserved Page | 65
17.
After Operator are satisfy with the Operation Parameters
Swipe Right
on
Start Task
to Begin Safety Checklist
18.
Perform Visual Inspection and Confirm there are nobody within 10m of the UAV
19.
Perform Visual Inspection and Confirm there are nobody within Flight Route
20.
Once Visual Inspection is completed, Operator can now select
Start
to Begin Task
21.
The Flight Route is now uploading to the UAV
22.
P-SERIES UAV will begin operation in 5 seconds.
23.
Task Status should now displayed as “Task Running”
24.
Select this icon to open the operation status and monitor the aircraft operation.
Start Button Swipe Right to Start Task
Safety Checklist
Confirmation and Start
Task Confirmation – Uploading Route
Task Confirmation – Starting in 5 Seconds
Task is now Running
Summary of Contents for P Series
