XAG P Series, Pilot Operating Handbook, Page: 13 / 73

@2018 XAG Australia All Rights Reserved Page | 13
known status of the UAV, and has the ability to lock the device if there are any illegal or inappropriate
activities.
Operation Mode
SUPERX RTK flight control system unifies the new hardware structure and high-performance industrial
sensors by few taps, P-SERIES can fly autonomously and avoid obstacles. Safety risk will be minimized with
the unique AI Fault Prediction. XAG P-Series uses a XAG dedicated SUPERX RTK flight control system,
providing multiple operation modes: Standard Pattern, Custom Waypoint, Spot Spray and Manual Mode.
Standard Pattern:
Custom Waypoint
Standard Pattern Operation mode guides the aircraft to travel
along a system generated and operator approved flight route.
The flight routes are generated after each corners of the field
are recorded, and flight parameters confirmed. In this operation
mode, operator are able to edit the parameters of Spray Width,
Boundary Safe Distance, Obstacle Safe Distance, No Spray Safe
Distance for the field, and parameters of Speed, Height, Terrain
Following, Dosage and Atomization ration for the UAV. In this
operation mode, the aircraft will maintain distance from the
vegetation in a zigzag route.
Standard Pattern Mode
Waypoint operation mode is recommended for operators who
wish to apply liquid based material on specific area in a Point to
Point mode..
Custom Waypoint Mode