Answering System Operation
34
Remote Operation through a Tone Telephone
You can use many Answering System features when you are away from home. To
protect your privacy, most of the features can be used only after you enter the three-digit
Remote Access Code.
Remote Access Codes
The Remote Access Codes are preset at the factory as shown below. You can use the
preset codes or choose your own.
PRIMARY MAILBOX:
999
MAILBOX 1:
555
MAILBOX 2:
666
MAILBOX 3:
777
MAILBOX 4:
888
NOTE:
If the
RESET
button is pressed, the Remote Access Codes return to the factory
preset codes.
Changing of the Remote Access Codes
All of the digits of the Remote Access Codes are a combination of numbers 5, 6, 7, 8,
9, 0.
IMPORTANT:
Digits 1, 2, 3, and 4 cannot be used when changing the Remote Access
Codes for any mailbox (including the PRIMARY MAILBOX).
1.
Press a mailbox button for MAILBOX 1, 2, 3, or 4. For the PRIMARY MAILBOX,
follow steps 2 to 6.
2.
Press and hold down the button until you hear the announcement,
“
Your password is XXX, please enter new password
.”
3.
Press and release the button, the corresponding number will be displayed
and announced. Press and release the button repeatedly until the desired
first digit of the code is displayed and mentioned.
4.
Press and release the button, the corresponding number will be displayed
and announced. Press and release the button repeatedly until the desired
second digit of the code is displayed and mentioned.
5.
Press and release the button, the corresponding number will be displayed
and announced. Press and release the button repeatedly until the desired
third digit of the code is displayed and mentioned.
6.
Press the button, the 3-digits you have selected will be announced. If your
new Remote Access Code is the same as that of another mailbox, the
Answering System will not record your new password and announce,
“please try
again.”
MIN
DAY
CODE
HOUR
CODE
DAY
HOUR
MIN
Summary of Contents for XG2400
Page 54: ...Notes 46 ...
Page 55: ...Notes 47 ...
