Xact XG2400 Owner'S Manual Download Page 35

Page: 35 / 57

Caller ID System Operation

IMPORTANT

In order to utilize the Caller ID feature, you

must subscribe to Caller ID service from

your local telephone company.

J. Deleting Message Waiting Indication

Press and hold the

/MENU

button to enter the menu.

Press the button to go to the MESSAGE WAITING programming option.

Press the button to reset the Message Waiting Indication. “DEL” will
begin flashing.

Press and hold the

/RE/PA

button to delete the indication. A long “beep” will

sound to confirm the setting has been saved.

Continue with programming or press the

/MENU

button to return to

STANDBY mode.

K. Setting the Area Code

Press and hold the

/MENU

button to enter the menu.

Press the button to go to the AREA CODE programming option.

Press the button to change the setting. “000” will begin flashing.

Press the TELEPHONE KEYPAD to buttons to enter the three digit area
code for your phone number.

When the desired setting is displayed, press and hold the

/RE/PA

button to

save the setting. A long “beep” will sound to confirm the setting has been saved.

Press the

/MENU

button to return to STANDBY mode.

NOTE:

To use the call back function, press the

/OPTION

button and then select the

10-DIGIT DIALING mode. Press the button and the unit will automatically dial
the stored 7-digit number plus the area code.

EDIT/FLASH

S A V E

VOICE MAIL

EDIT/FLASH

S A V E

VOICE MAIL

TALK

VOICE MAIL

Summary of Contents for XG2400


























































Search results

Summary of Contents for XG2400

Reviews:

Related manuals for XG2400

Brands by name

Popular brands

Xact XG2400, Owner'S Manual

Search results

Summary of Contents for XG2400

Reviews:

Related manuals for XG2400

Brands by name

Popular brands