Xact XG2400 Owner'S Manual Download Page 31

Page: 31 / 57

TELEPHONE

Function

KEYPAD

MSG Waiting Delete:

Clears current message waiting indication.

Area Code:

This unit does not require any programming of an Area

Code. However, this option could be used to add the local Area Code
to numbers that were stored as 7-digits in the phone book and 10-
digit dialing is required in the local calling area.

NOTE:

At any time during options programming you can quit and the settings

that you have changed will be saved. Press the

/MENU

button to quit

the options menu or let the options programming time out by not pressing
any TELEPHONE KEYPAD buttons for 20 seconds.

A. Setting the Ringer Level

Press and hold the

/MENU

button to enter the menu.

Press the

button to change the setting. “HI” will begin flashing.

Press the SCROLL UP or DOWN button to toggle between HI, LOW, and
OFF.

When the desired setting is displayed, press and hold the

/RE/PA

button to

save the setting. A long “beep” will sound to confirm the setting has been saved.

Continue with programming or press the

/MENU

button to return to

STANDBY mode.

B. Changing the Language

Press and hold the

/MENU

button to enter the menu.

Press the button to go to the LANGUAGE programming option.

Press the

button to change the setting. “ENGLISH” will begin

flashing.

Press the SCROLL UP or DOWN button to toggle between ENGLISH,
ESPANOL, and FRANCAIS.

When the desired setting is displayed, press and hold the

/RE/PA

button to

save the setting. A long “beep” will sound to confirm the setting has been saved.

Continue with programming or press the

/MENU

button to return to

STANDBY mode.

Caller ID System Operation

EDIT/FLASH

VOICE MAIL

S A V E

VOICE MAIL

EDIT/FLASH

VOICE MAIL

S A V E

VOICE MAIL

Summary of Contents for XG2400


























































Search results

Summary of Contents for XG2400

Reviews:

Related manuals for XG2400

Brands by name

Popular brands

Xact XG2400, Owner'S Manual

Search results

Summary of Contents for XG2400

Reviews:

Related manuals for XG2400

Brands by name

Popular brands