Desk Mounting
For normal position, as shown in Figure 1, place
the
BASE UNIT
on any desired but suitable
location.
Wall Mounting
You may choose to put the
BASE UNIT
of your cordless telephone on a wall.
1.
With the back of the
BASE UNIT
facing up, connect the SHORT TELEPHONE LINE
CORD to the TELEPHONE LINE CONNECTION JACK.
2.
Insert the free end of the SHORT TELEPHONE LINE CORD through the hole of the
MOUNTING BRACKET.
3.
Insert the OUTER HOOKS of the MOUNTING BRACKET into the matching slots on
the back of the
BASE UNIT
as shown in FIGURE 2.
4.
Push the MOUNTING BRACKET upward until the LOCKING HOOKS snaps into the
inner slots of the
BASE UNIT
.
5.
Plug the free end of the SHORT TELEPHONE LINE CORD into the MODULAR WALL
JACK.
6.
Align the upper keyhole of the MOUNTING BRACKET with the upper stud of the wall
plate, so that the opening end of the MOUNTING BRACKET matches the lower stud,
then pull the
BASE UNIT
down until it is securely seated.
Desk Mounting
10
FIGURE 1
FIGURE 2
FIGURE 3
MOUNTING
BRACKET
MODULAR
WALL JACK
WALL
PLATE
WALL PLATE STUD
SHORT TELEPHONE
LINE CORD
1
2
3
3
3
3
4
5
5
Summary of Contents for XG2400
Page 54: ...Notes 46 ...
Page 55: ...Notes 47 ...
