Xact XG2400 Owner'S Manual Download Page 32

Page: 32 / 57

C. Turning the FIRST RING ON or OFF

Press and hold the

/MENU

button to enter the menu.

Press the button to go to the FIRST RING programming option.

Press the

button to change the setting. “On” will begin flashing.

Press the SCROLL UP or DOWN button to toggle between ON and OFF.

When the desired setting is displayed, press and hold the

/RE/PA

button to

save the setting. A long “beep” will sound to confirm the setting has been saved.

Continue with programming or press the

/MENU

button to return to

STANDBY mode.

D. Setting the Time and Date

Press and hold the

/MENU

button to enter the menu.

Press the button to go to the TIME set programming option.

Press the

button to change the setting. The month will begin

flashing.

Press the TELEPHONE KEYPAD to button to enter the month. The
date will begin flashing.

Press the TELEPHONE KEYPAD to button to enter the date. The
hour will begin flashing.

Press the TELEPHONE KEYPAD to button to enter the hour. The
minutes will begin flashing.

Press the TELEPHONE KEYPAD to button to enter the minutes.
“AM” and “PM” will begin flashing.

Press the TELEPHONE KEYPAD button to choose AM or press the
button to choose PM.

When the desired setting is displayed, press and hold the

/RE/PA

button to

save the setting. A long “beep” will sound to confirm the setting has been saved.

10.

Continue with programming or press the

/MENU

button to return to

STANDBY mode.

Caller ID System Operation

VOICE MAIL

EDIT/FLASH

S A V E

VOICE MAIL

EDIT/FLASH

S A V E

VOICE MAIL

Summary of Contents for XG2400


























































Search results

Summary of Contents for XG2400

Reviews:

Related manuals for XG2400

Brands by name

Popular brands

Xact XG2400, Owner'S Manual

Search results

Summary of Contents for XG2400

Reviews:

Related manuals for XG2400

Brands by name

Popular brands