9
EN
12
Never use in extreme weather conditions e.g. a storm.
13
Not suitable for children under 13 years.
14
The SUP is suitable for 1x adult. The maximum load capacity is
150 kg.
Inflate
Unpack the SUP and unroll it on a smooth and clean surface. Connect the air tap to the
pump.
• Open the twist lock from the valve.
• Connect the air tap to the valve.
• Check the recommended air pressure before starting inflation.
When the air pressure is reached, simply remove the air tap and close the valve again with
the twist cap.
Do not exceed 15 PSI air pressure under any circumstances. The pump may not display the
air pressure immediately. If the pump does not display air pressure above 8 PSI, contact
customer service. Only use the enclosed pump, as we are not liable for damage in connec
tion with thirdparty accessories or electronic pumps. The valve is protected against
uncontrolled air loss by a pressure system. The valve pin must point upwards before the
pumping process.
Attach fins
Push the fin with the round side inwards into the rail.
Secure the fin by inserting the clip into the existing notch through the fin.
To remove the fins again, loosen the clip and simply pull the fin out of the rail.
The small fins are placed on the left/right side and the big one in the middle.
Paddle
Guide the bar with the handle into the opening of the middle bar. The middle bar is inserted
into the lower bar with the paddle and fixed with a pin on the front side. The middle rod
allows the paddle to be adjusted in size. Simply open the clip and pull out the desired
length.
When the desired length is reached close the clip.
