Mounting the console onto the wall
The console can be mounted onto the wall using two screws. On the back of the console you will find two slot
holes (heart to heart distance 96mm). Fitting screws are included with the set.
Place the console on a flat surface
If you choose not to mount the console, you can attach the rubber feet-caps (included) to the back of the
console. These feet-caps make sure the console will not move around when using the console.
2.3 The menus
After connecting the console, the display will read
HOME CONTROL
. The time will be displayed on the bottom line (for
setting the time, see 5.1).
If you do not see the words
HOME CONTROL
but
TAMPER
, you need to close the top compartment on the console. After
closing the compartment, enter your PIN code (factory settings 0000, see 8.3) to remove the word
TAMPER
. The
display now shows
DISARMED
and you will hear a double tone to confirm. Then the text
HOME CONTROL
will be shown.
2.3.1 Choosing your language
All menu items are displayed in English for default. You can choose any of the other available languages as
follows:
•
To access the menu, press the menu UP or menu DOWN? button. The display now shows
ENTER PIN
.
•
Enter the 4-digit PIN code (factory setting 0000. See 8.3 for changing the PIN code). The display is cleared
and shows a * for each number entered. When the PIN code has been entered correctly, the first menu
item will show up on the display.
•
Use the menu buttons UP/DOWN ?
to go to menu item
7. Options
. Press OK to select this menu item. You
can also go to this menu item directly by pressing a 7 on the number pad.
•
Use the menu buttons UP/DOWN to go to submenu item
Languages
. Press OK to select this submenu item.
•
Use the menu buttons UP/DOWN ?
to select your language. Press OK to select and confirm.
•
Press Clear and afterwards 1 (=Yes) to quit the menu.
2.3.2 The menu in English
The menu items in the English language menu are:
1. INSTALL
Registering and de-registering sensors, remote controls and thermostats.
2. SET CLOCK
Setting the clock (5.1).
3. PHONE NUMS
Setting the phone numbers (5.2).
Sub-menu:
PHONE 1
PHONE 2
PHONE 3
PHONE 4
PHONE 5
PHONE 6
4. MESSAGE
Recording and checking your own spoken message (5.3).
Sub-menu:
1. RECORD Record your own spoken message
2. REPLAY Listen to your own spoken message