7.7 Comfort functions of the security console
You can also control the modules using the console. If you do not see a menu item, the console is in
HOME
CONTROL
mode. The display shows
HOME CONTROL
. To control a module with Unit Code 1, press “1” followed by “ON”
or “OFF”. If you want to control module 12, press “1”, then “2”, followed by “ON” or “OFF”.
The ALL LIGHTS ON function can be send by pressing “0” followed by “ON”, the display will show
LIGHTS ON
. ALL
UNITS OFF can be send by pressing “0” followed by “OFF”, the display will show
ALL OFF
.
7.8 Timers
The console can turn on and off lighting and appliances at pre-programmed times, so that it appears as if you
are at home, the so called LIVED IN LOOK. You can also program timed temperature setbacks .
7.8.1 Setting the console mode
1. To access the menu, press the menu UP?
or menu DOWN?
button. The display now shows
ENTER PIN
.
2. Enter your 4-digit PIN code (factory setting 0000). For every digit entered, a * will appear.
3. When the PIN code has been entered correctly, the word
INSTALL
will show up on the display.
4. Use the menu buttons UP/DOWN ?
to go to menu item
7. OPTIONS
. Press OK to select this menu item. You can
also go to this menu item directly by pressing a 7 on the number pad.
5. Press “0” on the number pad
.
Use the menu buttons UP/DOWN?
to choose
EURO 7 DAY.
Press OK.
6. Press CLEAR again to quit the menu. To confirm your choice, press 1 for Yes or 2 for No. If you choose Yes,
you will quit the menu. If you choose No, you go back to the first menu item. .
7.8.2 Setting Timers
1. To access the menu, press the menu UP or menu DOWN?
button. The display now shows
ENTER PIN.
2. Enter your 4-digit PIN code (factory setting 0000. See 8.3 for changing the PIN code). The display is cleared
and shows a * for each number entered.
3. When the PIN code has been entered correctly, the word
INSTALL
will show up on the display.
4. Use the menu buttons UP/DOWN?
to go to menu item
9. SET TIMER
. Press OK to select this menu item. You can
also go to this menu item directly by pressing a 9 on the number pad.
5. The display will read
NEW TIMER.
Press OK.
6. When set to 7-days mode (see 7.8.1), the display will read
1. HOME CNTRL
and
2. HEAT / COOL,
select respective
timer to set; either option 1 for control of lights and appliances, or option 2 for timed temperature setbacks.
Use the menu buttons
UP/DOWN?
to check timers you previously set. The top menu item is always called
NEW
TIMER
, unless all 14 timer points have been set.
7.
The display will read
CHOOSE DAYS.
Use the number keys to enter the DAYS, where 1=Monday, 2= Tuesday and
so on. When the days are set, press OK.
8a
). HOME AUTOMATION TIMER: The display will read
UNIT NUMBER
or
THST
. Use the number pad to enter the
UNIT CODE of the desired module (1-16) or the Thermostat nr (1-4). Example: If you enter 12, the display will
read
TIMER 12 ON
. The lowest line will read "
:
".
8b
). TEMPERATURE SETBACK: In case the Temperature setback is chosen, an extra choice has to be made,
regarding which temperature level has to be used during the timed event. Choose either
COMFORT
(which is the
comfort level set to the console for the respective thermostat),
ECONOMY
(setback applies for all registered
Temperature Zones), or
FROST
(also applies for all registered thermostats at once)
9. Enter the time you want the lights to be switched on, or the timed temperature setback has to take place (24
hour notation). If you make a mistake, press CLEAR. Press ON when you only want to enter the time the lights
need to be switched on.
10. Press OK. The display now reads
TIMER 12 OFF
. The lowest line will read "
:
".
11. Enter the time you want lights to be switched off or the timed temperature setback has to stop. If you make a
mistake, press CLEAR. Press OK when you do not want to enter a switch-off time.
12. The bottom line on the display now reads
1. WEEKLY
13. Use the menu buttons UP/DOWN?
to select:
1.
WEEKLY:
The timer setting is executed every week.
2.
ONE WEEK:
The timer setting is only used one week from today.
3.
RANDOM:
The timer setting is executed weekly, but varies within the hour entered (if you entered
20:30, the time may vary between 20:00 and 20:59).
4.
ARMED ONLY:
The timer setting is only executed when the system is in ARMED AWAY mode.
14. Make your choice and press OK. The display now reads
NEW TIMER
.
15. Press CLEAR again to quit the menu. To confirm your choice, press 1 for Yes or 2 for No. If you choose Yes,
you will quit the menu. If you choose No, you go back to the first menu item.
