s t e r e o D S P p o w e r a m p l i f i e r
a m p l i f i e r s
OPERATION INSTRUCTION
SETUP AMPLIFIER ID
DEVICE NO.
#
1
Amplifier ID
Then, turn CHA to change the amplifier ID from 1 to 255.
Press CHA button again and save the setting.
C.
NOISE GATE SETUP
Under the menu SETUP AMPLIFIER ID, press the CHA button
again for about 3 seconds and then the LCD shows as follows:
NOISE GATE SETUP
ON
E.
LOAD PROGRAM
Press the CHB button for about 3 seconds, the LCD shows as follows:
Then, turn CHA to select one program (1-21).
Press CHB button again, save the setting and load the selected
program. At the same time, the LCD shows:
LOADING ...
Several seconds later, the LOADING is finished and the system
return the menu.
NOTE:
1.
Among 21 programs, No.21 is not used under the online
mode without PEQ, XOVER and DELAY. The other 20 programs
can be saved and recalled on the online mode.
2.
The volume is mute automatically after every LOAD PROGRAM.
3.
When the system switches from the online mode to the offline,
the system can load the program that is saved under the online
mode. At the same time, the volume is automatically mute.
OFF LINE MODE
Switch on the power, the system accesses the OFFLINE mode.
A.
ADJUST THE VOLUME
Turn CHA/CHB button to adjust the input level of CHA/CHB.
Pressing the CHB button for 1 second, both channels will be
muted.
B.
SETUP THE AMPLIFIER ID
Press CHA button for about 3 seconds, the LCD shows as
follows:
LOAD PROGRAM P: 11
NO PEQ
+
XOVER
+
DELAY
Program Number
Program Name
F.
SETUP VOLUME PROTECT
Under the menu of load program, press the CHB button again
for about 3 seconds and then the LCD shows as follows:
VOLUME MUTE PROTECT
AUTO MUTE: ON
AUTO MUTE: ON. When the power is on, the volume of CHA/CHB
is MUTE automatically.
AUTO MUTE: OFF. When the power is on, the volume of
CHA/CHB comes to the setting when power was off last time.
G.
SETUP GAIN LINK
Under the menu of load program, press the CHB button two
times again for about 3 seconds and then the LCD shows as
follows:
GAIN LINK SETUP
ON
Turn the CHB button to switch on/off gain link. Then, press the
CHB button again to save the setting.
GAIN LINK: ON. the volume of CHA/CHB is linked.
GAIN LINK: OFF. the volume of CHA/CHB is independent.
H.
SECURITY SETUP
Under the menu of load program, press the CHB button three
times again for about 3 seconds and then the LCD shows as
follows:
SECURITY SETUP
Then, press the CHB button again to enter the security password
to lock all the functions of the DSP amplifier.
Turn the CHB button to switch on/off AUTO MUTE. Then, press
the CHB button again to save the setting.
Turn the CHA button to switch on/off the noise gate. Then, press
the CHA button again to save the setting.
NOISE GATE: ON.
It insert a noise gate on the output of CHA/CHB automatically.
NOISE GATE: OFF. The noise gate is not inserted.
X
-
T
R
E
M
E
4
X
-TREME
via Monti Urali, 31 - 42029 Reggio Emilia (Italy) • ph. +39 - 0522 - 557735 • fax +39 - 0522 - 393733 • e-mail: [email protected]
D.
SUB ADDRESS
Under the menu NOISE GATE SETUP, press the CHA button
again for about 3 seconds and then the LCD shows as follows:
Turn the CHA button to change the Sub Address number.
Then, press the CHA button again to save the setting.
FIRMWARE: DSP VS_1.0
SUB ADDRESS: 423
