NOTES
1.
Battery life is calculated on the current ratings in the standby mode with weekly testings. If its
operation mode changes to an alarming condition, the battery life will be decreased accordingly.
2.
The smoke alarm functions between 40 and 100°F (4.4 and 37.8°C). Prolonged exposure to
temperatures outside of this range can reduce battery life and affect accuracy. We do not
recommend operating the device outside of this range.
Maintenance
To keep your smoke alarm in good working order, follow these simple steps:
1.
Verify the unit's alarm sound and indicator are working properly by testing the unit once a week.
2.
As a minimum your smoke alarm should be cleaned once every 3 months: Remove the unit from
the ceiling and clean the alarm cover and vents with your vacuum cleaner fitted with the soft brush
attachment to remove dust and dirt.
3.
Never use detergents or other solvents to clean the unit.
4.
Avoid spraying air fresheners, hair spray or other aerosols near the alarm.
5.
Do not paint the unit. Paint will seal the vents and interfere with the sensor’s ability to detect fire
.
6.
Never attempt to disassemble the unit or clean inside. Doing so will void your warranty.
7.
When removed, place the smoke alarm back in its proper location as soon as possible, to assure
continuous protection from fire.
8.
When household cleaning supplies or similar contaminants are used, the area should be ventilated.
Troubleshooting
PROBLEM
SOLUTION
Your smoke alarm does not sound
during testing.
Please check whether the alarm is properly attached to the
mounting bracket.
Make sure you push the test button firmly.
Check the installation positioning. The wireless signal
Maximum Number of
Interconnected Units
24 wireless units (Only compatible with X-Sense wireless
alarms)
Transmission Range
Over 820 ft (250 m) in open air
