1
× CO Alarm
2 × Screws
2
× Anchor Plugs
1
× User Manual
Peak Concentration
Indication
Test/Silence Button
Battery Status
CO Concentration
The Test/Silence button is used to test the unit's electronics and to silence the unit during an alarm. When testing the alarm
weekly, press and hold the test button and you will hear a short beep, indicating that the alarm has entered the test mode.
XC01/XC05P:
You should first wake up your alarm by pressing the test button; once the alarm has woken up, the LCD
display will activate, then press the test button again until you hear a short beep, indicating that the alarm has entered the
test mode. Please refer to the
“Alarm Testing” section for further information. The alarm goes back to the standby mode after
testing. To save power, the alarm is designed to automatically turn off the LCD display if there has been no operation for 5
minutes.
XC01P-R:
Short press the test button and you will hear a short beep, indicating that the alarm has entered the test mode.
NOTE:
After a test has begun, the alarm will sound and the LED indicator will flash red. This does not indicate that CO is
present.If you press the test button during an alarm state, the unit will enter the silence mode.
CO Alarm Levels
This carbon monoxide alarm is programmed to sound an alarm at the following CO concentrations within the time periods
listed:
02
03
Package Contents
Product Features
