14
15
3. Insert the anchor plug into the screw hole and hammer it in until the head of the anchor plug is flush with the wall.
4. Use the two provided screws or 3.5
× 25 mm countersunk screws to screw into the two anchor plugs. Be sure to leave a 5
mm (1/5-inch) gap between the head of the anchor plugs and the screws, which will allow for easy device mounting.
5. Mount and lock the device onto the wall by aligning the two mounting slots on the back of the device with the screws on
the wall.
6. Test the device by pushing the test button to make sure that the device is functioning properly.
Installation on a Table
The base of the detector has two feet built into the design that allow it to stand freely on a flat surface.
NOTE:
When placing on a shelf, please adhere to the recommended placement as described in “Where to Install.”
