10
11
6. In extremely humid areas. This alarm should be at least 3 m (10 feet) from a bath or shower, sauna, humidifier, vaporizer,
dishwasher, laundry room, utility room or other sources of high humidity.
7. In areas where the temperature is colder than
4°C (40°F) or hotter than 38°C (100°F). For example, non-air-conditioned crawl
spaces, unfinished attics, uninsulated or poorly insulated ceilings, porches and garages.
8. Where the air is turbulent, such as near ceiling fans, heat vents, air conditioner vents, fresh air return vents, or open windows.
Excessive air flow may prevent any CO from reaching the sensors.
9. In direct sunlight.
To Activate the Device
This device is equipped with a battery insulating film to ensure it will not be powered on during transportation before it has
XC01/XC05P
Insulating Film
XC01P-R
Insulating Film
been shipped from the factory. When installing this product, you will need to pull out the film before powering on and
activating the device.
Before use, pull out the battery insulating film from the battery compartment to power on the device. After the device is turned
on, the buzzer will beep once, the LCD backlight will light up, and the LED indicator will flash through 8 cycles
(yellow/green/red). The device will then enter standby mode.
Installation Method
