RM200QC User Manual
9
Powering On and Off (battery operation only)
Turn the instrument on by pressing and releasing the Power button.
You are asked to calibrate the instrument. Please follow the on screen instructions for
calibration (refer to the Calibration section later in this manual for details).
The instrument automatically powers down into a sleep mode between 40 to 80 seconds of
inactivity to conserver battery power. Any button press from the sleep mode will wake up the
instrument.
After 75 minutes of inactivity, the instrument powers completely off. From this state, you will
need to press the Power button to turn on the instrument.
You can manually power down the instrument by pressing the Power button, highlighting Yes
from on the screen, and pressing the Enter button. Make sure to always position the white
reference slider over the optics when powering down the instrument. You will need to press
the Power button to turn on the instrument when this power down method is used.
Initial Startup
The very first time RM200QC is powered on, you are asked to select the desired operating
language for the instrument. After the language is selected, you can go through a short tutorial
on using the instrument and then perform a calibration.
The initial startup options are also chosen from within the Settings menu. Refer to the Setting
menu in the Operation section to review and set other options, such as time and date.
Language Selection
1.
Select the language from the list by pressing the up and down sides of the Navigation
control. Refer to the Introduction section for button locations.
2.
Press the Enter (Select) button to activate the language and continue with the Tutorial.
Press Enter to continue
Power button
Summary of Contents for RM200QC
Page 1: ...RM200QC User Manual...
