M A 3 S P E C T R O P H O T O M E T E R
12
Measurement Option
This option is used to set auto measure mode.
Manual Measure:
When set to Manual,
you must press the Measure button or tap the screen once all three
contact sensor indicators turn green in the display to take a measurement.
Automatic Measure:
When set to Automatic,
this option allows the instrument to automatically take a
measurement once all three contact sensor indicators turn green in the display. No measurement switch press
or screen tap is required. Once a measurement is taken, the instrument must be repositioned in order for
another measurement to occur.
Dark Mode Option
This option is used to help reduce measurement noise on very dark sample measurements.
Off:
When set to off,
the option is not utilized.
Manual:
When set to Manual,
the instrument will display a message after the first measurement asking if you
would like to turn on dark mode when a dark sample is detected. Select Yes to turn on Dark Mode or select No
to continue without the option being used.
Automatic:
When set to Automatic (default setting), the instrument automatically switches to dark mode after a
dark sample is detected.
Speaker Option
This option is used to turn the instrument speaker on or off. The instrument beeps when the screen is
tapped, after a measurement, and after a calibration.
Language
This option is used to set the language that is displayed on the instrument during operation.
To set the language, tap
Language
and then tap the desired language.
Device Information
This option is used to view important instrument information such as hardware version, calibration
reference serial number, battery data, etc.
Power Off
This option is used to power off the instrument.
To access, tap
Power
Off
and then tap
Power down
to confirm.
