X-Rite iCPlate2, User Manual

Page: 32 / 44

iCPlate2
32
3.7 Visually checking the dot
After a measurement the picture will be held in the device’s memory
until the next measurement and can be displayed or transferred to a
host PC at any time by selecting the function.
As usual you will find the toolbar on the left side of the LCD with
the following functions.
Depending on the setting the binary image will be displayed with a
resolution of 6,350ppi (a pixel corresponds to 4 micron x 4 micron)
or 2,700ppi (a pixel corresponds to 2 micron x 2 micron).
A light gray ruler in the top left corner shows the current resolution
and the associated length of the line:
• 200µm at 6,350 ppi
• 00µm at 2,700 ppi
This means that an absolute size comparison of the represented dots
is possible immediately.
Transferring the binary image to a host makes it possible to
document the dot quality. X-Rite offers the Capture Tool software,
which can accept the binary image and copy it into any application
that supports the Windows clipboard.
Increase representation resolution to 2,700 ppi
Reduce representation resolution to 6,350 ppi
Transfer the current binary image to the host PC via RS232
Back to previous display
iCPlate2
3•Operation
32
3