X-Rite iCPlate2, User Manual

Page: 24 / 44

iCPlate2
24
3.5 Inputting a reference curve
The user can switch to ‘Input a reference curve’ by selecting the
function in the settings window (see section 3.3).
You will find the toolbar on the left side of the LCD.
An XY diagram of the defined sample points for the current
reference curve is shown on the LCD. The X axis corresponds to the
nominal value and the Y axis to the reference value. The currently
selected nominal value is indicated on the lower end of the Y axis
and the associated reference value on the upper end, provided that a
sampling point for the reference curve is planned at this location.
All reference values are reset by selecting the function.
You preset the nominal value using and .The position of the
nominal value is marked by a small black arrow on the X axis of the
diagram. After initially selecting the nominal value select to
input the value. Thereafter the increment and decrement
functions will be highlighted in the toolbar. Per default, the reference
value is the same as the nominal value. To enter a 45° reference
curve, successively set the nominal value to the value of the patches
being measured, select the function and press <ENTER> button.
To move to the next sampling point, select .
You delete a value using and .
The position of the nominal value is marked by a small black arrow
on the X axis of the diagram. After initially selecting the nominal
value select to delete the value.