•
N-COM - NOLAN COMMUNICATION SYSTEM PRE-SETTING
(Available depending on the product version).
Your X-Lite helmet is factory-present to be equipped with the N-Com communication system. During the
communication system installation (see the specific instructions contained in the N-Com kit), it will be necessary to
remove the foam material fillers located in the polystyrene cheek pads next to the N-Com earphones seats.
WARNING
-
The above-mentioned fillers should
only
be removed if the helmet is used with an N-COM compatible system
installed.
•
N-COM - NOLAN COMMUNICATION SYSTEM PRE-SETTING
(Available depending on the product version).
Your X-Lite helmet is factory-present to be equipped with the N-Com communication system. During the
communication system installation (see the specific instructions contained in the N-Com kit), it will be necessary to
remove the foam material fillers located in the polystyrene cheek pads next to the N-Com earphones seats.
WARNING
-
The above-mentioned fillers should
only
be removed if the helmet is used with an N-COM compatible system
installed.
Summary of Contents for X-1004
Page 1: ......
Page 51: ...Fig 22B Fig 23 Fig 24 Fig 25 Fig 22B Fig 23 Fig 24 Fig 25...
Page 52: ......
