25
X903
VENTILATION SYSTEM
The ventilation system of the helmet consists of:
Lower ventilation system
It allows ventilation in the mouth area and conveys the air directly on the visor reducing
fogging.
See Fig.25 for opening and closing operations.
Top Ventilation System
It allows direct ventilation in the top area of the head, even at low speed. See Fig.26 for
opening and closing operations.
Rear ventilation system
It is integrated in a rear spoiler and allows warm and stale air to flow out ensuring an
optimum comfort inside the helmet (Fig.27).
SETTING UP THE N-COM - NOLAN COMMUNICATION SYSTEM
(Available depending on the product version)
Your helmet is factory-preset to be equipped with the N-Com communication system.
During the communication system installation (see the specific instructions contained
in the N-Com kit), it will be necessary to remove from the helmet the foam material fillers
located in the polystyrene cheek pads next to the N-Com earphones seats.
The above-mentioned fillers should
only
be removed if the helmet is used with a
compatible N-Com system installed.
INSTRUCTIONS FOR USE
Summary of Contents for LIX9U0003740299
