18
Auto Mode
The unit replays all available laser sequences in order.
Access Auto Mode by pushing switch #1 UP/ON and leaving all other
switches DOWN/OFF. Auto Mode is provided as a convenience for
testing but is not recommended to be used during shows due to a loss
of attenuation and X axis aiming control.
DMX Control
The unit responds only to DMX control inputs from an external DMX
controller. SOUND ACTIVE and AUTO modes are also accessible via DMX
Channel #1 on all fixtures.
Access DMX Mode by making sure that switches 9 & 10 are DOWN/OFF
and use switches 1-8 to set the DMX address as show below.
Dip switches 9 and 10 are used for special functions and thus the laser is not DMX
addressable above address 255. To reach a DMX address of 49 for example, turn
switches 1, 5 & 6 to “On,” (1+16+32=49).
Your X-Laser product can be linked to other X-Laser fixtures or other
DMX compatible fixtures. To create this link, it is recommended that
true DMX cable be used for best operation and that the DMX chain be
terminated at the end of the link. Please follow these steps:
1) From your DMX controller, connect a 3 pin DMX cable to the “DMX
IN” port on the back of your X-Laser Product. For any additional fixtures,
continue to daisy chain the DMX cable from the “DMX OUT” port on the
