background image

13 

 

5. As a reminder for clients in the United States, Class 3B and 4 laser 
products may only be used by a person or employees of an organization 
which holds a Laser Light Show Variance. All such persons must have 
adequate and appropriate laser operation and safety training, keep a 
copy of their variance with them at all performances, and keep 
appropriate safety logs and checklists. The variance holder must also file 
annual reports as required by the CDRH (FDA) and ensure that their 
variance is renewed prior to expiration. Copies of these forms, 
introductory training materials, and more may be found on the DVD 
enclosed with this product.  

6. We strongly recommend that each user of an X-Laser product read 
“Safe Laser Display” literature published as ANSI Z136.1 and Z136.10. 
These and a wealth of laser safety information are available from 
www.rli.com and the Laser Institute of America. We also strongly 
recommend that proper safety equipment such as wavelength specific 
laser safety glasses be used during any times in which a technician or 
others could be exposed to laser radiation. 

7. Excellent laser training is available from a number of private 
institutions such as RLI above and we recommend that all of our users 
undertake it. Basic safety training is provided with this product but is 
NOT meant to be comprehensive. Please follow the enclosed 
instructions on the user DVD.  

8. Do not ever, under any circumstances, allow laser beams to enter 
airspace without approval from the FAA or any other applicable 
authorities. Striking an aircraft with a laser beam, even if accidental, is 
very dangerous and is a felony punishable by fines and jail time. 

We want you to have a wonderful experience with our products so that 
you can bring the thrill of professional laser light shows to your 
audiences. The safety procedures outlined in this manual should be easy 
to successfully implement in your shows and provide you with years of 
safe and profitable laser displays. Please contact us if you have any 
questions about how to safely and effectively use our products! 

 

 

Summary of Contents for Aurora 4C

























Reviews: