11
Projector Specifications
Dimensions: 21.75" x 8.5" x 6"
Weight: 9.2lbs
Housing: Black Anodized 6061 Aluminum
Power: 110/220V auto switching, 3 pin male IEC inlet
40 watts typical, 60 watts peak
3A 250V Slow blow fuse
Scanners: Open loop micro stepper motors
Cooling: Forced air/TEC
Control options: Auto, Sound Active, 9 channel DMX
Settings interface: DIP switches
Ambient conditions: 60-90 degrees F, <70% relative humidity
Color Modulation: TTL
Nominal divergence: 1-2.5mRad
Beam source: DPSS/Direct diode
Laser power levels:
4C - 50mW 532nm, 100mW 650nm, 100mW 445nm, 100mW
650nm/100mW 445nm
4G – 50mW 532nm x 4
FDA Hazard Class: 3B
Power Variations
X-Lasers are hand built laser light show products produced from scratch
and built to order. Because lasers are made with such small power
levels, variances from fixture to fixture do and will exist. This can be
influenced by a dozen factors from temperature and diode age to
normal voltage fluctuations and initial cold start power. We make all
lasers within very small (<10%) tolerances but under some conditions
differences can be noticeable. If you require precisely matched diodes
please contact your dealer and request a power match before ordering
as variances within tolerance are not considered a defect.
