6
UNFOLDING THE FRAME
Undo the folding blockade (a). Unfold the frame by lifting the handle until the locks
click into position (b).
WARNING:
Before use, make sure that the folding
mechanisms are blocked.
MOUNTING OF THE FRONT WHEEL
To install the wheel, put the front wheel axis into mounting hole until engaged.
DISMOUNTING OF FRONT WHEEL
To remove the wheel, press the button shown in the picture and take it off.
AT TACHING OF REAR WHEEL
To install the wheel, slide it with the axle into the mounting hole until it is engaged.
DISASSEMBLY OF REAR WHEEL
To remove the wheel, press the button shown in the picture and take it off.
FRONT WHEEL LOCK
The stroller is equipped with swivel wheels. The slider shown in figures is used to lock
rotation. Press it down to lock the wheels to drive in a straight direction (a).
To unlock the wheel, move the slider up (b).
INSTALLING OF THE BUMPER BAR
Push in the ends of the bumper bar into mounting holes, until locks are snapped.
TAKING THE BUMPER BAR OFF
Press the bumper bar lock buttons and slide its ends out of the mounting holes.
FOOTREST ADJUSTMENT
Press the buttons on both sides of footrest and adjust it to the required position.
RECLINING SEAT ADJUSTMENT
To lower the seat, squeeze the lock lever and move the seat down (a).
To lift the seat, grab the belt with one hand, and squeeze the lock lever with other hand
and move the seat up (b).
BRAKE
To apply the brake: push the pedal down with your foot. To release the brake pick its bar up.
INCREASING THE HOOD IN CLIN ATION ANGLE
The hood may be expanded by an additional part. In order to do this, undo the zipper
between the upper and lower part of the hood.
BELT ADJUSTMENT
To adjust the belt length, move the belt towards a regulator. Regulators are hidden under
protective covers.
HARNESS BUCKLE FASTENING AND RELEASE
To fasten the belt buckle, fasten elements 1 and 2, 3 and 4 together. Then slide the joined
elements into the buckle until you hear a click. To release the harness press the round
button in the middle of the buckle and release the straps.
MOUNTING OF CARRYCOT
To install the carrycot, slide its adaptors in the bumper bar sockets. *
DISMOUNTING OF CARRYCOT
To take the carrycot off, push the carrycot lock buttons and slide them off the mounting
holes.
AT TACHING THE COVER
Install as shown in the photo. *
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
ENGLISH
Summary of Contents for X-DOUBLE
