42
Chapter 5
•
Size
- Character size
5
,
6
,
7
, or
8
bits can be selected (default is
8
).
•
Flow Control
- Either
None
,
XON/XOFF
,
CTS/RTS
, or
Both
can be selected (default
is
None
).
•
Serial Touch Screen selections
- Select the proper touch screen
ELO
,
MicroTouch
or
FastPoint
from the list.
•
Touch Screen on
- Select the proper serial port (COM port) or
None
from the list.
Use the
Touch Screen
tab to configure touch screens that are connected to the thin client
(USB). The tab is available (not grayed out) when the thin client detects that a touch
screen is attached through a USB port and the setup (or calibration) has not been
performed. The
Touch Setup
window prompts you to touch two circles on the screen to
make the necessary calibration adjustment. Once calibrated, the adjustment values are
saved in the local terminal NVRAM until the system is reset to factory default, or another
type of touch monitor is connected.