manualshive.com logo in svg

Wyse 3315SE, Reference Manual, Page: 187 / 260

Share
Download
Wyse 3315SE Reference Manual Download Page 187

163

FTP and Bootstrap.exe

The download is initiated through the 

Upgrade

 command button on the 

Upgrade

 

properties sheet. Information in the 

Upgrade

 properties sheet must be filled out to 

ensure a proper download. See “Resetting Properties” for more details about this 
properties sheet.

Bootstrap.exe and params.ini must be installed on your FTP server to use this 
method of download. To install these files, drag and drop them from the CD-ROM to 
the appropriate directory on your FTP server. The upgrade firmware can be 
obtained from manufacturer’s customer support.

The Upgrade Process

To upgrade:

1.

Place bootstrap.exe, params.ini, and the new firmware file on your FTP server.

2.

Press 

F2

 to invoke the 

Terminal Properties

 dialog box.

3.

Click on the 

Upgrade

 properties sheet tab and enter the appropriate 

information.

4.

Click on the 

Upgrade

 command button.

The bootstrap program uses 

Server Name

, 

User ID

, 

Password

, and 

Server 

Directory

 from the 

Upgrade

 properties sheet to access the FTP server. The 

program performs the upgrade, checks for errors, and reboots the terminal.

Status

This display box shows status information about the 
connection to the FTP server, and the firmware 
download. Connect and download errors are also 
reported. The default is blank.

Save Password

Check this box to save the entered password in the 
registry.

Upgrade

Click on this command button to initiate the upgrade 
procedure. By default the button is disabled until an 
entry is made in the 

FTP Server

 field.

Table 31-1

Upgrade Properties Sheet, Continued

Function

Description

Summary of Contents for 3315SE





































































































































































































































































Reviews:

No comments