26
3.
Press
SELECT
to activate Reset Defaults:
Scroller address is 1
Fan address is 2
Time to Destination address is 3
Fan speed is High
Gel speed is High
Head-Feet Restrictions
The HEAD-FEET parameter is a method of accounting for the voltage drop in the
power/signal cable caused by the current drawn by each color changer.
To help understand this issue, think of it as water pressure (voltage) in a hose (cable)
where you have multiple water sprinkler heads (color changers). If the hose (cable) is too
long or you have too many sprinkler heads (color changers), the water pressure (voltage)
will be too low.
HEAD-FEET is defined as "the sum of cable lengths from each color changer to a single
power supply output".
Head-Feet Example:
1 2 3 4
Figure 10
The length of cable from the Power Supply to:
1st Coloram 100'
2nd Coloram 120'
Figure 8
PS Power Supply
Coloram IT
Color Changers
100’
20’
20’
20’
Power/Data Cable
