24
The “Max at Frame” number is the largest number of all the frame
counts.
Example
: The color changer has been to following frames:
Frame 1
15 times
Frame 2
11 times
Frame 3
37 times
The Max at Frame number displayed is 37.
OPERATING HOURS
Cleaning Info
A.
Lifetime operating hours is shown at the bottom of the first display, which is
the total number of hours the scroller has been in use over its lifetime. This
counter is never reset.
B.
Press
SELECT
to display the gauge that indicates how the color changer
currently rates between “Like New” and “Needs Cleaning”.
Figure 7
Cleaning means cleaning dust out of the vent slots, off the printed circuit
board, off the internal components and cleaning the inside surfaces of the
tag sensor.
C.
The display also shows the number of hours since the last cleaning of the
color changer. Reset the Hours function after each cleaning:
Reset Hours
i.
Press
SELECT
to select the Reset Hours function.
ii.
Use the
!
and
"
buttons to select Yes on the “Reset Cleaning Hours
Gauge?”
iii.
Press
SELECT
to activate Reset Cleaning Hours Gauge.
Maintenance Info
A.
Lifetime operating hours is shown at the bottom of the first display, which is