27
3rd Coloram 140'
4th Coloram 160'
520 "head feet"
The maximum HEAD-FEET for each of the Coloram IT Color Changers is as follows:
84520
4-inch Coloram IT
1500 head feet
87110
7.5-inch Coloram IT
1500 head feet
810100
10-inch Coloram IT
1000 head feet
If a daisy chain consists of different models, use the model with the smallest amount of
"head feet" for the calculation.
Mounting and Installation Accessories
The components of your Coloram IT System may require the installation of additional
mounting accessories or the replacement of others. Some of these accessories are
supplied, such as the power supply hanger brackets and your choice of one color
changer mounting plate. Other accessories, such as the power supply rack mount kit
and additional mounting plates, may need to be purchased separately. The following
sections describe the procedures for installation and replacement of some of these
accessories.
Color Changer Mounting Plate
The Coloram IT Color Changer ships with your choice of available mounting plates
installed. It may be necessary, when mounting the color changer on different light
fixtures, to replace the mounting plate.
1.
Place the color changer on a flat
surface, with the Coloram IT logo face
down.
2.
Unscrew the four screws which hold
the current mounting plate on.
3.
Place the replacement mounting
plate on the color changer, aligning the
screw holes properly.
4.
Fasten the four corners of the
mounting plate to the color changer using
the same screws you removed in step 2.
Figure 11
