18
Operating voltage has dropped below the minimum operating requirement
of 15 volts. The cable between the Coloram IT and the PS Power Supply
may be too long.
•
“VOLTAGE DROPPED
BELOW 13V
UNIT SHUTDOWN”
Unit has automatically shut down because operating voltage has dropped
below 13 volts for more than one second. The voltage typically drops this
low if the Coloram IT cable is too long — the head-feet limit has been
exceeded. The Coloram IT cable must be shortened or the number of
Coloram IT scrollers must be reduced to solve this problem.
GEL ALERTS
1.
“GELSTRING OUT
OF POSITION — UNIT
SHUTDOWN”
Scroller motor automatically shuts down if gelstring is not at its programmed
frame position or a roller is stuck.
2.
“GELSTRING DID
NOT INIT PROPERLY”
Gelstring did not initialize properly. Please check that gelstring is properly
installed.
3.
“GELSTRING IS
BROKEN —
UNIT SHUTDOWN”
Scroller motor automatically shuts down if gelstring has broken or come
loose from a roller. Gelstring needs to be replaced or reinstalled.
MOTOR ALERT
1.
“MOTOR IS
OPERATING AT A HI
CURRENT LEVEL”
High current level at the scroller motor may indicate an ususually high level
of friction at the motor. Please check scroller motor for possible
maintenance or replacement.
FAN ALERT
1.
“FAN IS OFF WHILE
THE LAMP IS ON”
The color changer may overheat or premature fading of the gelstring colors
may occur when the scroller fan is off while the fixture lamp is on.
