11
Follow the on-screen instructions when downloading the
PC software.
4. RAdIO TRANSMISSION Of PROGRAMMING
SETTINGS
So that the USB programming stick can send data to sys-
tem components such as radio energy-saving controllers,
these components must first of all be set to teachin mode.
The USB programming stick must be plugged into the
•
PC’s USB port.
The PC software must be running on the PC and
•
programming must be complete.
For transmission, the receivermust be set to teach-in
•
mode. For more information on this, refer to the opera-
ting manual for the relevant device.
The USB programming stick can now send data to
•
the devices that are ready to receive. To start the
transmission process, activate the transmission function
in the PC software.
The USB programming stick does not remain permanently
taught-in on the devices to be programmed.
If the USB programming stick is being used to
send a weekly programme, all devices that are
ready to receive will receive the programme
accordingly. An unlimited number of receivers can be
programmed.
BDA_USB-Programmierstick_0886500213.indd 11
11.08.2010 08:50:31