12
When being put into operation for the first time, a
radio energy-saving controller can be switched to
teach-in mode immediately after data entry
(please see the corresponding operating manual for
detailed instructions). If a wireless signal is received from
the USB programming stick during the teach-in period,
the radio energy-saving controller will change over to
continuous reception and PCC (PC configuration) will
appear on the display. You can exit PCC mode again by
pressing the OK button.
5. SySTEM REqUIREMENTS
Windows
•
®
XP, Windows Vista™
USB connection
•
6. GENERAl INfORMATION ABOUT
RAdIO OPERATION
Radio transmission is performed on a non-exclusive trans-
mission path, which means that there is a possibility of
interference occurring. Interference can also be caused
by switching operations, electrical motors or defective
electrical devices.
The range of transmission within buildings can differ
greatly from that available in the open air. Besides the
transmitting power and the reception characteristics of
the receiver, environmental factors such as humidity in
BDA_USB-Programmierstick_0886500213.indd 12
11.08.2010 08:50:31