11
30-10001669
ii. Rotate the Target to your desired
straightness tolerance. Your chosen
target hole should align with the hole
through the Sensor Backing.
Align Target with
Hole
C. Rail End Clamp with Spool
Assembly)
i. Follow the installation steps from the
first Rail End Clamp, except on the
opposite end of the rail.
D. Steel Wire Installation
i. Locate the end of the wire on the
spool and thread it between the han-
dles and along the groove on the Rail
End Clamp.
ii. Continue threading the wire through
the Target and Sensor Backing, and
along the groove of the other Rail End
Clamp.
