
10
30-10001669
iii. While the Cam Handle is in the per-
pendicular position relative to the Eye
Bolt, rotate the handle clockwise so
that it tightens the plates snugly onto
the nose of the rail. When you extend
the Cam Handle, it should loosen the
blocks from the rail. Return the handle
to the perpendicular, tightened
position.
b. Sensor Block
i. Place the sensor block onto the nose of
the rail. The electrical enclosure should
be on the same side as the Cam Handle
on the Rail End Clamp. There is a
magnet recessed into the aluminum
block which will hold the Sensor Block
on the rail.
Magnet