background image

 2 

30-10001669 

 

Table of Contents 

Important Warnings……………………………………………………………………………………………………...3 

Description ......................................................................................................................................................... 4 

Features and Functions ..................................................................................................................................... 5 

Set Up .................................................................................................................................................................. 9 

1.  Rail Set Up ............................................................................................................................................... 9 

2.  Rail Straightness Tester Set Up ............................................................................................................. 9 

a. 

Rail End Clamp ............................................................................................................................... 10 

c. 

Rail End Clamp (with Spool Assembly) ....................................................................................... 11 

d. 

Steel Wire Installation .................................................................................................................... 11 

Testing and Operation ..................................................................................................................................... 13 

Troubleshooting ............................................................................................................................................... 14 

Replacement Parts ....................................................................................................................................... 14 

Bill of Materials ................................................................................................................................................. 15 

Rail End Clamp 30-10001686 ........................................................................................................................... 15 

Exploded View .......................................................................................................................................... 15 

Parts List ................................................................................................................................................... 15 

Sensor Block 30-10001673 .............................................................................................................................. 16 

Exploded View .......................................................................................................................................... 16 

Parts List ................................................................................................................................................... 16 

Rail End Clamp 30-10001698 ........................................................................................................................... 17 

Exploded View .......................................................................................................................................... 17 

Parts List ................................................................................................................................................... 18 

 

 
 

Summary of Contents for 30-10001669



















Reviews: