FKE003
Product information
Page 6 of 8
Subject to technical changes
FKE003_V2.2_PI_2018-01_EN
4.3 Set
parameter
1. Select the parameter to be set (first enable the advanced level if necessary).
2. Parameter change approved. Press all 3 keys simultaneously for 5 seconds.
The LED "Parameter change approved" flashes.
3. Change the values using the
▲
or
▼
keys.
5s
5s
When changing the parameters, it is not necessary to re-enable access to make further value
adjustments.
Current values are simply displayed. They cannot be adjusted even if the LED "Parameter change
approved" is flashing.
4. To disable parameter change, press all 3 keys simultaneously again for 5 seconds.
If no key is pressed within 2 minutes, the display automatically returns to the standard level and
parameter change is disabled. The jump back is always made to the temperature display.
4.4
Set module number
For easier setting of the module number (P11), the menu item can be opened directly by pressing the
Service key (behind the front plate) 3 times in rapid succession.
All that is needed now to set the address is to release parameter adjustment.
4.5
Block keys against unauthorised
operation
If the Service key and the arrow key
▼
are pressed simultaneously for 5 seconds, the keyboard (3
visible keys) is blocked. An effective block is confirmed by displaying the text ""
noOP
" for 1 second.
Blocking the keys simultaneously exits the advanced level and branches to the standard menu.
Access is also blocked if it was released before.
Note!
▪
3 x Service key => address P11
Note!
▪
5s Service key +
▼
=> keys blocked
