FOR ELECTRICAL ISOLATION OF 2 BUS SEGMENTS
CAN-Bridge_V1.1.1_PI_2019-04_EN
1
Subject to technical changes
CAN bridge
1 CAN bridge
For electrical isolation of 2 bus segments
1.1
Front view
Fig. 1: CAN bridge front view
1.2
Features
•
Integrated 230V power supply
•
Electrical isolation of two CAN bus segments
•
Active suppression of incomplete packets
•
Extends the number of possible CAN bus topologies
•
Extends the total maximum possible CAN bus length
•
Integrated, switchable CAN bus terminating resistors
•
Smart data filter
•
Semi-automatic baud rate adjustment over the gateway
•
Different baud rates possible on both CAN bus segments
•
Physical CAN bus measurement to detect level errors and wiring errors
•
Diagnostics mode for plug-in ready refrigeration units
•
Simple handling
•
Connection to the Wurm system by communication bus (CAN bus) and FRIGODATA XP
1.3
Scope of supply
•
1 x product information
•
3 x screw terminal sockets
•
1 x terminal strip with end cover plate
•
2 x short PE connection leads
•
1 x adapter ZCB-ADP/CB-PI
•
1 x RJ45 patch cable
