FOR ELECTRICAL ISOLATION OF 2 BUS SEGMENTS
CAN-Bridge_V1.1.1_PI_2019-04_EN
3
Subject to technical changes
CAN bridge
Software revision and validity of documentation
Any software versions not listed are special solutions for individual projects and are not described in detail in this
document. This document automatically ceases to be valid if a new technical description is issued.
Manufacturer:
Wurm GmbH & Co. KG Elektronische Systeme, Morsbachtalstraße 30, D-42857 Remscheid
For further information, see our website at
www.wurm.de
1.5 Installing the device
The device is intended for top-hat rail mounting and is suitable for operation in fuse boxes and distri-
bution cabinets. The devices can be positioned immediately adjacent to one another without gaps.
WARNING
DANGER TO LIFE FROM ELECTRIC SHOCK AND/OR FIRE!
•
Switch off the power to the entire plant before installing! Otherwise a mains voltage and/or
external voltage may still be present even if the control voltage is switched off!
•
Take note of the maximum loads on all connections!
The entire system must be free of voltage.
1.
(A)
Place the device with the leading edge at an acute angle to the top-hat rail.
2.
(B)
Push the device downwards onto the top-hat rail.
The device snaps into the top-hat rail with mounting catch
(a)
.
You can now connect the device.
Fig. 2: Top-hat rail installation
Software version
V1.1.1 - 2019-04
Documentation status
A
B
