WUNDER WT2-M3011 Manual Download Page 14

Page: 14 / 40

Press the STANDBY button on the remote control unit to turn on the device. Wait until the

startup OS has loaded. When the loading is finished, the menu with the initial settings will

appear on the screen. Press the STANDBY button on the remote control unit again to put the

device in standby mode.
6. To completely turn off the device, disconnect it from the power supply.

Initial settings

The setup guide menu will appear on the screen if you are using the device for the first time

or want to restore the factory default settings.
1. Turn on the power of the DVB-T2 antenna if you are receiving a signal from an active antenna.
2. Select the OSD language, then select your country to define the channel search frequency grid.
3. Set the Search Type to All and use the auto search if you do not know the broadcast frequency

in your region. Once the channel search is complete, you can start watching TV programs.

ATTENTION! The DVB-C signal allows you to watch only the open channels broadcast by

your cable operator. Each region has its own free access to open cable channels. Closed

cable channels involve a monthly subscription fee.

Main menu

The main menu contains icons of all sections for quick access to submenus and applications.

Sections are arranged according to the principles of elementary logic, the user interface is

intuitive, follow the on-screen prompts.
By default, the passwords are set to 000000, but you can change them if necessary.

Software

WUNDERTECHNIK digital TV receivers run on pre-installed software. You will get the most

up-to-date features and additional capabilities for your receiver!

Internet

Configure the device to receive Wi-Fi signal from your home router. Use an external USB Wi-

Fi adapter (not included in the package) to connect and configure the data (enter the router

password). Then you can use this receiver to view network applications IPTV, Megogo, YouTube.

ATTENTION! This model cannot be used for full-fledged web work or perform interactive

OTT functions!

Some USB devices may not be recognized. To record high definition TV programs, the USB device

version must be 2.0 or higher. Otherwise, the device will not be able to record HD programs

correctly.
The manufacturer cannot guarantee compatibility with all USB memory devices and assumes

no responsibility for any loss of data that may occur when connected to this device.

III. CLEANING AND MAINTENANCE

Wipe the housing of the appliance with a soft dry cloth.

DO NOT immerse the appliance in water or wash under running water!

DO NOT use a sponge or tissue with hard or abrasive surface or abrasive pastes. Do not use any

chemically aggressive substances or any other agents that are not recommended for cleaning items.
Store the assembled appliance in a dry, ventilated place away from heating appliances and

direct sunlight.
During transportation and storage, do not expose the device to mechanical stress, that may

lead to damage of the device and/or violation of the package integrity.
Keep the device package away from water and other liquids.

IV. BEFORE ADDRESSING A SERVICE CENTER

Problem

Possible causes

Solution

The device does not

turn on, the Standby

diode is not lit

There is no voltage in the mains or

the outlet is defective

Check the mains voltage or plug the