wtw PurCon, Operating Manual

Page: 9 / 48

PurCon Safety instructions
55
2 Safety instructions
This operating manual contains essential instructions that must be fol-
lowed during the commissioning, operation and maintenance of the
instrument.
Consequently, all responsible personnel must read this operating man-
ual carefully before working with the instrument. The operating manual
must always be kept available within the vicinity of the instrument.
2.1 Authorized use
Authorized use consists exclusively of the preparation of samples for
the analysis of component substances using analyzers. The technical
specifications given in chapter T
ECHNICAL
D
ATA
must be observed. Any
other use is considered to be unauthorized.
2.2 General safety instructions
This instrument is constructed and tested according to the legally
required safety regulations for electronic measuring instruments. It left
the factory in a safe and secure technical condition.
Function and
operational safety
The failure-free function and operational safety of the instrument is only
guaranteed if the generally applicable safety measures and the special
safety instructions in this operating manual are followed during its use.
The smooth functioning and operational safety of the instrument can
only be guaranteed under the climatic conditions specified in the chap-
ter, T
ECHNICAL
D
ATA
.
If the instrument was transported from a cold environment to a warm
environment, the formation of condensate can impair the functioning of
the instrument. In this case, wait for the instrument to adjust to room
temperature before recommissioning.
Caution
Opening the instrument or adjustment, maintenance and repair work
must only be performed by personnel authorized by WTW.
EN 61010-1 The instrument complies with the requirements of EN 61010-1, protec-
tion class I.
For the type of protection, see the chapter, T
ECHNICAL
D
ATA
.
All work on the instrument beyond the activities described in this man-
ual, especially all installation activities, must only be performed by
trained and qualified personnel.
This also applies to changing the fuses of electronic parts.
Safe operation If safe operation is no longer possible, the instrument must be taken out