manualshive.com logo in svg

wtw PB 150, Operating Manual

Share
Download
wtw PB 150 Operating Manual Download Page 19

Safety

19

2

Safety

This operating manual contains basic instructions that you must follow 
during the commissioning, operation and maintenance of the sampler. 
Consequently, all responsible personnel must read this operating 
manual before working with the sampler. 

The operating manual must always be available within the vicinity of the 
sampler.

Safety instructions

In the individual chapters of this operating manual, the following safety 
instructions indicate different danger levels:

Warning

indicates notes that have to be exactly observed to avoid possibly great 
danger for people.

Caution

indicates notes that have to be exactly observed to avoid possible slight 
injuries or damage to your instrument or the environment.

Further notes

Note

indicates notes that draw your attention to special features.

Note

indicates cross-references to other documents (e. g. operating manu-
als).

2.1

Authorized use

The sampler is authorized exclusively for taking liquid, aqueous 
samples in an environment that is not potentially explosive. 
The technical specifications as given in chapter 10 T

ECHNICAL

 

DATA

 

must be observed. 
Only the operation and running of the sampler according to the instruc-
tions given in this operating manual is authorized. 
Any other use is considered 

unauthorized

.

Summary of Contents for PB 150













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands