wtw NitraLyt 700 IQ, Operating Manual, Page: 11 / 61

NitraLyt
®
700 IQ Commissioning
3 - 1 ba75397d03 12/2004
3 Commissioning
3.1 Scope of delivery
!
NitraLyt
®
700 IQ
!
The sensor is fitted with a protective hood and protective caps
!
Operating manual.
3.2 Installation
Connection cable The SACIQ sensor connection cable is required to connect the sensor.
Information on this and other IQ S
ENSOR
N
ET
accessories is given in
the WTW catalog and on the Internet.
Note
How to connect the SACIQ sensor connection cable to the terminal
strip of an MIQ module is described in chapter 3 I
NSTALLATION
of the
IQ S
ENSOR
N
ET
system operating manual.
Caution
The NitraLyt
®
700 IQ nitrate sensor unit may only be immersed in con-
junction with a mounted combination electrode. Moisture must be pre-
vented from penetrating the nitrate sensor during the replacement of
the electrode as, otherwise, the sensor could be destroyed.
Which electrodes can be used in conjunction with the NitraLyt
®
700 IQ
nitrate sensor is given in section 6.1 S
ENSOR AND ELECTRODES
.
Are the plug
connections dry?
Before connecting the sensor and sensor connection cable, please
make sure that the plug connections are dry. If moisture gets into the
plug connections, first dry the plug connections (dab them dry or blow
them dry using compressed air).
Note
Do not suspend the sensor on the sensor connection cable. Use an
armature or electrode holder. Information on this and other IQ S
ENSOR
N
ET
accessories is given in the WTW catalog and in the Internet.