DIQ/S 181
The SETTINGS menu
61
ba77083e01
02/2015
5.3
Sensor S01
In this menu, you can assign a name of your choice to the sensor and
adjust the sensor so it optimally meets the requirements of your appli-
cation (measured parameter, measuring range, etc.).
All settings are specific for the respective sensor type. They can only
be modified if the sensor is connected and communicates properly with
the DIQ/S 181. Otherwise, the dataset is inactive. How to deal with in-
active datasets is described below.
Procedure:
Carrying out settings
If the selected system language is not available in a sensor,
all displays of this sensor appear in the standard language,
English. To activate the selected system language for this
component, a software update of the component is
required. Please contact WTW.
General steps for editing sensor settings are given below.
The
Sensor name
menu item is always on the first position
of the setting table. Details of further sensor settings can be
found in the chapter, C
OMMISSIONING
of the sensor operat-
ing manual.
5
Open the
SETTINGS
menu with
<S>
.
6
Press
<
>
and
<OK>
to select and confirm the menu item,
Sensor S01
.
The following note appears:
If the measuring mode or measuring range is changed, the
links of the sensor are erased.
7
If you want to continue, press
<OK>
.
The setting table of the sensor is displayed.
8
Edit the setting table as described in section 4.3.2.
Summary of Contents for DIQ/S 181
