wtw DIQ/S 181, Operating Manual

Page: 31 / 104

DIQ/S 181
Installation
31
ba77083e01 02/2015
Fig. 3-16 24 V AC/DC connection.
NOTE
No free wires are allowed to project into the enclosure. Otherwise there
is the danger of short circuits that can cause a fire. Always cut off any
wires that are not in use as closely as possible to the cable gland.
The complete assignment of the terminal strip is shown in
section 3.11.
8 Connect wires 1 and 2 to the terminal strip. Make sure that the
cable assignment agrees with the specification on the terminal
label under the terminal strip.
9 Tighten the cap nut (pos. 3 in Fig. 3-15).
10 Close the enclosure of the DIQ/S 181.
Terminal
designation:
X17
X16
24V AC DC
EINGANG
INPUT
POWER