wtw DIQ/S 181, Operating Manual, Page: 21 / 104

DIQ/S 181
Installation
21
ba77083e01 02/2015
Mounting the DIQ/S 181
on a top hat rail
Fig. 3-7 Mounting the DIQ/S 181 on a top hat rail
3.6.5 Panel mounting
Materials required

PMS/IQ kit for panel mounting (see chapter 10 A
CCESSORIES AND
OPTIONS
).
Tools

3 mm set screw wrench (contained in the panel installation kit).
1 Screw the clamping assembly (pos. 1 in Fig. 3-7) on the back
of the universal transmitter with the two plastic tapping screws
(pos. 2).
2 Attach the universal transmitter to the top hat rail from above
using the clamping assembly and press against the rail until
the clamping assembly clicks into place. The universal trans-
mitter can be moved sideways afterwards.
3 To unhook the universal transmitter, press it downward and
pull it forward at the bottom.